You will need a tape measure, level, pencil, drill, and screwdriver. 1. Measure the height and width of the mirror. Add 1/2 inch to each measurement for the width and height of the frame (the lip on the mirror). This is the size you will need to cut your wood. 2. Cut two pieces of wood using a chop saw or table saw to the size you just measured. Make sure that you have one piece of wood that is taller than the mirror and one piece that is wider than the mirror. 3. Drill pilot holes in each corner of the wood using a drill bit that is slightly smaller in diameter than your screws. Drill into solid wood only - do not
There is no specific tool required to install a frameless mirror - you will just need some common tools that can be found in most households. For example, you will need a level, tape measure, hammer, and screwdriver. When installing a frameless mirror, it is important to make sure that the surface on which the mirror will be mounted is completely level. You can use a level to check this before drilling any holes or placing any screws. If the surface is not level, you may need to use shims (thin pieces of wood or metal) to adjust the height of the mirror until it is perfectly level. Once the surface is levelled, you can use a tape measure to find the center
